Dust with a slightly dampened with a quality cleaner formulated for wood furniture, soft, lint-free cloth.

Wipe dry immediately with a dry, soft cloth in the direction of the wood grain. Spills should be immediately wiped up with a damp cloth.

Precautions :

Use coasters for glasses and mugs.

Don't place a potted plant unless it’s in a water-tight container or in a drip tray. Use protective pads under equipment such as printers and monitor stands because they may leave permanent stains or marks.

Don't let sunlight discolor wood. Moove periodically items of their tops so that the entire surface is exposed to an even amount of light over time.

Extremely high or low humidity is a damaging environmental factor, maintaining a relative humidity of 35-65 percent is recommended. Wood moove, checks, warps, swell and is part of its natural characteristic.

Re-apply oil to give your product a new life :

Rub the entire surface with No. 000 steel wool in the direction of the grain to remove small surface light scratches. If necessary, use no.360 grit sandpaper in the direction of the grain. To fix deeper scratches.

Apply a small amount of oil wax oil to a clean, soft, cotton cloth. Wipe small sections at a time using a circular motion until the wood is coated.

Wipe off excess oil Within 10 minutes, rub again until the entire surface is dry. Allow the oil to dry for 24 hours before sitting in it to avoid transfer to clothing. Only apply oil when the product looks dry.

NOTE: Properly dispose of rags used with oil as they can accidentally combust. Rinse oily rags with water and hang over a line to allow air to get to all fibers.